Specifications

Model No.
A7670x-EVAL
Operating Voltage
Main Power Input (DC Jack): 12V to 42V DC [Connect to 12V DC Adapter]
​⚡
Has Reverse Polarity Protection
​
Battery Input (Header connector) : 3.7V to 4.2V DC [Connect a single cell 3.7V-4.2V Li-Po or Li-Ion Battery]
​
​⚠
 Doesn't have Reverse Polarity Protection
Dimensions
​
​
PCB Dimensions - Length: 64.2mm * Width: 42mm * Thickness: 10 mm
Battery Support
3.7V-4.2V DC Li-Po battery is supported.
Use > 400mAH capacity battery.
​
Cellular module
A760C-LASS - LTE-CAT1 - For use in India & Asia
​
A7670E - LTE-CAT1 - For Europe
​
A7670SA - LTE-CAT1 - For South America & Australia & Some networks in North America
Navigation hardware
Not present
​
​
Processor
Based on ASR chipset
Antenna
📶 Cellular : U.FL Connector & SMA Connector
Connectivity
 GPRS (HTTP, MQTT, TCP, UDP), SMS, Call
SIM connector
Push Push type Nano SIM card connector 
Flashing options
On board Micro USB interface  can be used for updating module firmware and send AT commands
Interfaces
USB and UART interfaces can be used for sending AT commands

Features

Purchase info

Last modified 8mo ago

Model No.	A7670x-EVAL
Operating Voltage	Main Power Input (DC Jack): 12V to 42V DC [Connect to 12V DC Adapter] ⚡ `Has Reverse Polarity Protection`
	Battery Input (Header connector) : 3.7V to 4.2V DC [Connect a single cell 3.7V-4.2V Li-Po or Li-Ion Battery] ⚠ `Doesn't have Reverse Polarity Protection`
Dimensions
	PCB Dimensions - Length: 64.2mm * Width: 42mm * Thickness: 10 mm
Battery Support	3.7V-4.2V DC Li-Po battery is supported. Use > 400mAH capacity battery.
Cellular module	A760C-LASS - LTE-CAT1 - For use in India & Asia
	A7670E - LTE-CAT1 - For Europe
	A7670SA - LTE-CAT1 - For South America & Australia & Some networks in North America
Navigation hardware	Not present

Processor	Based on ASR chipset
Antenna	📶 Cellular : U.FL Connector & SMA Connector
Connectivity	GPRS (HTTP, MQTT, TCP, UDP), SMS, Call
SIM connector	Push Push type Nano SIM card connector
Flashing options	On board Micro USB interface can be used for updating module firmware and send AT commands
Interfaces	USB and UART interfaces can be used for sending AT commands